DC Inverter UNI SPLIT Series
Duct
Type Unit
51
3.2 Standard Accessories
Indoor Unit Accessories
No. Name Appearance Q'ty Usage
1 Wired Controller
1 To control the indoor unit.
2 Nut with Washer
4
To fix the hook on the
cabinet of the unit.
3 Nut
4
To be used together with the
hanger bolt for installing the
unit.
4 Washer
4
To be used together with the
hanger bolt for installing the
unit.
5 Insulation
1 To insulate the gas pipe.
6 Insulation
1 To insulate the liquid pipe.
7 Fastener
8 To fasten the sponge.
8 Sponge
2 To insulate the drain pipe.
9
Ordinary Nut+
Tamperproof box
+
1
To prevent the removal of
the gas pipe connecting nut
(Refer to the fittings included
in delivery.)
10
Ordinary Nut+
Tamperproof box
+
1
To prevent the removal of
the liquid pipe connecting
nut (Refer to the fittings
included in delivery.)
11
Buckle magnetic
ring+ Cable tie
+
1+1
For engineering installation.
(only ASD-48BI2)
Outdoor Unit Accessories
No. Name Appearance Q'ty Usage
1 Drain Plug
or
0 or 3
or 4
or 5
To plug the unused drain
hole
2
Drainage
Connector
or
1
To connect with the hard
PVC drain pipe.
3
Buckle magnetic
ring+ Cable tie
+
1+2
For engineering installation.
(only ASGE-48BI2-3)
To Next Page
Loading...
