DC INVERTER U-MATCH AIR CONDITION MAINTENANCE
145
4 DISASSEMBLY AND ASSEMBLY PROCEDURE OF MAIN PARTS
4.1 Outdoor Unit
Single-fan Inverter Outdoor Unit, applicable to
ASGE-18AI, ASGE-24AI
Disassembly and Assembly of external casing
Remark : Before removing the outer housing, make sure that the unit has been cut off from
the power supply.
Step Illustration Handling Instruction
1. Remove the top cover
●Firstly, use screwdriver
to remove the screws on
the four sides of the top
cover.
●Remove the top cover
from the unit.
2. Remove the grill
●Use screwdriver to
remove the screws fixing
the grill.
●Remove the grill from
front panel.
To Next Page
Loading...
