Sinclair ASGE-18AI - Page 182

DC INVERTER U-MATCH AIR CONDITION MAINTENANCE
165
6. Assemble the
solenoid valve
● Install the solenoid
valve according to
disassembly
procedures.
7.Establish vacuum
inside the system
through liquid valve.
● Establish vacuum
inside the system
through liquid valve.
● Recharge the
refrigerant to the
system through liquid
valve.
● Recharge the
refrigerant to the
system through liquid
valve.
● The charge volume
must be identical to the
indications on
nameplate.
Establish vacuum
inside the system
through liquid valve
Establish vacuum
inside the system
through liquid valve