Sinclair ASGE-18AI - Page 183

DC INVERTER U-MATCH AIR CONDITION MAINTENANCE
166
Removal and Installation of Fan and Motor
Remark :
Step Illustration Handling Instruction
1. Remove the electric
box cover
?Use screwdriver to
loosen the screws on
electric box cover.
?Remove the cover
from electric box.
2. Remove the motor
power cable
?Use hand or forceps
to pull out the motor
power cable from
mainboard. (Note:
Before removal, please
mark the insert position
of the upper and lower
motor power cables
correctly).
3. Remove the axial
flow fan
? Hold the fan and do
not let it run
? Use spanner to
remove the tightening
nuts fixing the fan.