Sinclair ASGE-18AI - Page 184

DC INVERTER U-MATCH AIR CONDITION MAINTENANCE
167
4. Remove the fan
from motor
Remove the fan from
motor.
5. Remove the motor
?Use spanner and
screwdriver to remove
the bolts fixing the
motor.
?Remove the motor
from motor support.
6. Install a new motor
to motor support
?Put the new motor to
correct position.
?Use spanner and
screwdriver to fix the
motor to motor support
with bolts.
7. Connect the motor
power cable
?Connect the insert of
motor power cable to
the mainboard terminal
in reverse to the
disassembly
procedures.
Insert the inset block of motor
power cable into the mainboard