DC INVERTER U-MATCH AIR CONDITION MAINTENANCE
168
8. Assemble the fan
?Assemble the axial
flow fan to correct
position and fix it to the
motor shaft in reverse
to the disassembly
procedures.
?Put the electric box
cover to correct
position and fix it onto
the electric box
according to
disassembly
procedures.
9. Assemble the
electric box cover
?Assemble the electric
box cover to correct
position
? Use screwdriver to fix
the cover onto electric
box.
Removal and Installation of Electronic Expansion Valve
Remark : Before removing the compressor, make sure that there is no refrigerant inside the pipe system and
that the power has been cut off.
Step Illustratio n Handling Instruction
1. Remove the coil
of electronic
expansion valve
? Loosen the coil of
electronic expansion
valve with hand.
To Next Page
Loading...
