DC INVERTER U-MATCH AIR CONDITION MAINTENANCE
176
Removal and Installation of Fan and Motor
Before removal, please make sure that the power supply has been cut off. During removal,
please protect the parts properly and take special care to store the screws fixing the fan
Step Illustration Handling
Instruction
1.
Removal
the front
and back
propeller
housing
● Loosen the
screws fixing the
propeller
housing and
remove the front
and back
propeller
housing. (As
shown, what the
arrow indicates
is the front and
back propeller
housing)
2.
Remove
the
centrifugal
fan
● Use inner
hexagonal
spanner to
loosen the
screws fixing the
fan. Remove the
centrifugal fan.
(As shown in
Fig. 7, what the
straight line
indicates is the
inner hexagonal
spanner and the
position of fixing
screws, and
what the arrow
indicates is the
centrifugal fan)
To Next Page
Loading...
