DC INVERTER U-MATCH AIR CONDITION MAINTENANCE
177
3.
Remove
the motor
support
● Loosen the
screws fixing the
motor support
and remove the
motor support
sub-assembly.
(As shown, what
the arrow
indicates is the
motor support)
4.
Remove
the motor
● Loosen the
motor wiring
plug inside the
electric box.
Remove the
motor.
Removal of Evaporator
Remark: Before removal, please make sure that the power supply has been cut off. During removal, please
take care to protect the copper tube and aluminum fin of evaporator. The copper tube shall be well sealed if
it is to be removed for a long time.
Step Illustration Handling Instruction
1. Remove
the right side
plate
● Loosen the screws
tightening the right side
plate and remove the
right side plate (As
shown, what the arrow
indicates is the right
side plate).
To Next Page
Loading...
