Sinclair ASGE-18AI - Page 195

DC INVERTER U-MATCH AIR CONDITION MAINTENANCE
178
2. Remove
the left side
plate
● Loosen the screws
tightening the left side
plate and remove the
left side plate (As
shown, what the arrow
indicates is the left side
plate).
3. Remove
the evaporator
● Remove the screws
fixing the evaporator.
(As shown, there are
two fixing screws at the
position pointed by the
circle and other two
screws at similar
position indicated by the
arrow)
● Remove the
evaporator.
4. Remove
the evaporator
support
● Loosen the tapping
screws fixing the
evaporator support and
remove the evaporator
support. (As shown,
there are two tapping
screws at the position
pointed by the circle and
other two tapping
screws at similar
position indicated by the
arrow)