DC INVERTER U-MATCH AIR CONDITION MAINTENANCE
188
Disassembly of
evaporator
components
●Disassemble the
screws as shown by
the arrow in the graph
with screwdriver.
(There are 4 screws on
left and right of the
evaporator and 2 on
evaporator outlet press
plate modules)
Disassembly of fixing plate modules for air sweeping fans
Remark: Make sure the power supply is cut off before disassembling and protect all the parts during
disassembly.
Step Illustration Handling Instruction
Disassembly of
fixing plate
modules for air
sweeping fans
●Disassemble the
screws shown in the
graph with
screwdriver.
Disassembly of right and left polystyrene foam plates modules
Remark: Make sure the power supply is cut off before disassembling and protect all the parts during
disassembly. Do not heat or hit polystyrene foam modules.
Step Illustration Handling Instruction
Disassembly of
right and left
polystyrene
foam plates
modules
●Remove the right
and left polystyrene
foam plates modules
in the direction given
by the graph.
Disassembly of fan and motor components
Remark: Make sure the power supply is cut off before disassembling and protect all the parts during
To Next Page
Loading...
