DC INVERTER U-MATCH AIR CONDITION MAINTENANCE
192
Removal of Front Panel
Remark: Cut off the power and ensure the front panel and corner cover in good condition during removal.
Step Illustration Handling Instruction
1. Remove the
corner cover
● Pull the corner cover
outward with your hand
to remove it.
2. Remove the
screws
● Use the screwdriver to
rotate the screws to
position, so that you can
loosen the front panel
clamp. (See the arrow for
the screw position)
● There are totally 4
clamps on the four
corners of front panel.
After they are fully
loosened, you can pull
upward to remove the
front panel.
Removal of Water Tray
Remark: Cut off the power. Ensure that the power cable, signal wires and water tray are in good condition.
Step Illustration Handling Instruction
1. Remove the
electric box
cover and
flow-guide loop
● Loosen the screws on
electric box cover and
flow-guide loop.
Remove the front box
cover. Remove the
power cables and signal
wires connected to the
electric elements in the
electric box and
beneath the water tray.
To Next Page
Loading...
