DC INVERTER U-MATCH AIR CONDITION MAINTENANCE
193
2. Remove the
water tray
● Remove the screws
on four corners. Then,
pull upward to remove
the water tray. (As
shown, what the arrow
indicates is the water
tray and what the block
indicates is the screw)
Removal of Electric Box
Remark: Cut off the power. Ensure that the power cable, signal wires and electric box are in good condition.
Step Illustration Handling Instruction
Removal of
Electric Box
● Remove the four
fixing screws. Then,
pull upward to remove
the electric box
Removal of Fan
Remark: Cut off the power. Ensure the fan in good condition and free from deformation.
Step Illustration Handling Instruction
Removal of Fan
● Use spanner to
loosen the nuts.
Then, pull upward to
remove the fan. (See
the arrow for the nut
with gasket)
To Next Page
Loading...
