Screw
Motor
Cross
flow fan
Operating Procedures / Photos
Screw off 4 screws fixing the motor cover and then
take the motor cover out.
Screw
off the screw connecting the cross flow fan
and
motor, then pull out the motor and remove
the
cross flow fan.
Screw
off 5 screws fixing the left and right side of
the
evaporator, then elevate left side the evapora-
tor
to remove it backward.
7. Disassembling motor and cross flow fan
6. Disassembling the evaporator
Screws
CAUTION:
When repair, Carefully take out the evaporator and
pay
attention to protect the connecting pipe.
Screw
s
Motor
Press Plate
Screw
Screw off one screw which fix the connection board clamp.
Take down the connection board clamp.
To Next Page
Loading...
