Sinclair ASV-35AS WIFI - Step 2: Mounting the Outdoor Unit

- 16 -
STEP 2-MOUNTING OUTDOOR UNIT
1.Open the package and take out the
outdoor unit
1) When taking out the outdoor unit
after unpacking, do not lift the air
outlet grille at the back of outer case
(see F igure4-1).
2.Fix the outdoor unit at the roof of
vehicle and then drill holes.
1) Place the outdoor unit at the roof
of vehicle; lift the outdoor unit and
then place the outdoor unit after
drilling holes at the roof of vehicle.
Do not drag the outdoor unit.
Otherwise, the sealing strip may
fall off (see F igure4-2).
Figure4-1
Figure4-2