8
Fig 3-6
3. INSTALLATION METHOD
Putty
Putty
Putty
Trap
Trap
Trap
Fig 3-7
All the pictures in this manual are for
explanation purpose only.
Your wire controller may be slightly
different .The actual shape shall prevail.
6. Reattach the upper part of the wire controller
After adjusting the upper case and then buckle the upper case; avoid clamping the
wiring during installation. (
Fig 3-7
)
NOTE: DO NOT allow water to enter the remote control.
Use the trap and putty to seal the wires.
To Next Page
Loading...
