Troubleshooting 71
Remark:
1) Normal display: Display frequency of compressor when capacity needing.
2) Running mode: 0──Standby; 2──COOLING; 3──HEATING; 4──FORCED COOLING.
3) Fan speed: 0──OFF; 1~7──Speed increasing in turn.
4) SW1: Forced cooling button.
SW2:
Query
button
.
2.3 Function setting dial switches instructions
SW3 definition: Auto Addressing Dial
ON
Obtain network address automatically
OFF
Obtain network address manually
ON
Resetting indoor unit network addresses
OFF
Normal running mode
To Next Page
Loading...
