Singer Instruments ROTOR HDA - Removables; Black Bay; Pad Hopper; Dump Drawer

6
1
2
3
removaBles
BLACK BAY
PAD HOPPER
DUMP DRAWER
· The Black Bay is a loading bay for source and target plates.
You will need to remove the Black Bay to load plates.
· If you own The Stinger single colony picker then you will
need to remove the Black Bay in order to change between
the Pad Head and The Stinger.
· The Pad Hopper is where the fresh RePads™ are loaded.
· Load a stack of RePads™ (pins facing down) into the Hopper
as shown, ensuring the chamfered corner is to the top
right.
· The Pad Hopper is fully autoclavable to ensure RePads™
stay sterile. However, a pack of RePads™
includes a
protective card that means the RePads™ stay sterile
without autoclaving the Pad Hopper.
· The Dump Drawer is where used RePads™ are deposited.
· When a program is finished, the Dump Drawer can be
removed to dispose of the used RePads™.
· The Dump Drawer is fully autoclavable.