.)
Balance Wheel. Some of the first machines shipped
had balance
wheels with short
hubs. If
these are removed
for
any reason, in them by
sure to
locate
them so that
the bobbin winder pulley will hear about inch from
the left
hand edge of the pulley bearing 17, page 18).
No was furnished with ma-
chines, but these are now available with special
adaptor by
means of which they may be attached to the back of the
arm.
101-10 MACHINE
The
machine
is identical with the machine as
regards sewing mechanism and electrical equipment,
the
only
differences
being
as follows:
Aluminum Parts. In order to reduce the
weight of the
head
to make it available as a portable
machine, aluminum
instead of iron is used for the arm and bed, cloth plate, knee
lever, arm shaft bushing and bobbin winder bracket. All other
parts are identical with the machine.
Woodwork. Instead
of cabinet
table 19,
the
machine is mounted in a deluxe portable base and cover, C. W.
as
0
101-1
reassembling
Tl;
K2 (Fig.
Singerlight. Singerlight 101-1
101—10 101—2
101—2
101-2
No. 101-10
203.
To Previous Page
