To Next PageTo Next Page
Need help?Do you have a question about the Singer 141G Series and is the answer not in the manual?
General| Brand | Singer |
|---|---|
| Model | 141G Series |
| Category | Sewing Machine |
| Language | English |
Key safety guidelines for operating the sewing machine safely.
Precautions to prevent injuries and accidents during machine use.
Overview of the sewing machine model and its features.
Technical details and specifications of the sewing machine.
Information regarding the motor's power, torque, voltage, and frequency.
Diagrams and dimensions for cutting a table opening for the machine.
Steps for correctly installing the oil reservoir into the machine table.
Instructions on filling and maintaining the oil level for proper lubrication.
Guidance on checking and adjusting oil flow to the rotating hook.
Procedures for correctly installing the sewing needle.
Step-by-step instructions for threading the sewing machine.
How to wind thread onto the bobbin and adjust winding tension.
Instructions for correctly placing the bobbin into the bobbin case.
How to adjust the stitch length using the stitch dial.
Procedures for adjusting needle and bobbin thread tension.
Adjusting the stroke and pressure of the thread take-up spring.
How to adjust thread pull-out length by the take-up mechanism.
Adjusting the height of the presser foot using the knee lifter.
Procedures for lifting and lowering the presser foot.
Adjusting the pressure exerted by the presser foot.
How to install and adjust the sewing machine pedal.
Explains the different functions and positions of the foot pedal.
Adjusting the timing and clearance between needle and hook.
Adjusting the thread trimming mechanism for specific models.
Adjusting the position of the thread trimmer knives.
Adjusting the height and tilt of the feed dog for material feeding.
Adjusting the timing of the feed dog mechanism for stitch quality.
Explains the operation of the one-touch switch for needle positioning.
How to connect the foot pedal switch to the machine.
Instructions for cleaning the sewing machine head.
Guidance on lubricating the machine after periods of disuse.
Periodic checks of safety devices and machine components.
List of parts for the machine frame and covers.
Parts for the arm shaft and thread take-up lever mechanisms.
Parts for needle bar, upright shaft, and hook driving shaft.
List of parts related to the presser bar mechanism.
Parts list for the feed mechanism of the sewing machine.
Parts list for the thread trimming mechanism.
Special parts applicable to specific 141G models.
List of parts related to the machine's lubrication system.
Parts list for the oil reservoir system.
List of accessories supplied with the sewing machine.
