Singer 14T968DC - Two-Thread Overedge (Narrow): Setting up

Needle:
ATD:
Auto Tension Dial
“E”
Left Cover Stitch
Needle “C”
Unthreaded and
Remove Needle
Middle Cover Stitch
Needle “D”
Unthreaded and
Remove Needle
Right Cover Stitch
Needle “E”
Unthreaded and
Remove Needle
Overedge Left
Needle “A”
Unthreaded and
Remove Needle
Overedge Right
Needle “B” (Blue)
Threaded
Upper Looper Looper Engaged
and Not Threaded
Lower Looper
(Red)
Threaded
Chain Stitch Looper
(Brown)
Not Threaded
Upper Knife Engaged
Seam Guide Plate Not Installed
Use Knife Cover
Seam Width Dial “N”
Stitch Length Dial “N”
Presser Foot
Pressure
“N”
Differential Feed Dial “N”
Stitch Finger “N”
Spreader Engaged
Two-Thread Overedge (narrow) page 2
Set at: