Singer 15-90 - Page 13

FIG. 7
With the left hand,
hold the bobbin case as
shown in Fig. 7, the
slot in the edge being
at the top, and place
the bobbin into the
bobbin case.
FIG. 8
Then pull the
thread into the slot
as shown in Fig. 8,
and back under the
tension spring into
the slot at the end
of the tension spring
as shown in Fig. 9.

FIG 9
11
To Thread the Bobbin Case
Hold the bobbin
between the thumb
and forefinger of
the right hand, with
the thread on top
drawing from right
t9 left, as shown in
Fig. 7.
11
To
Thread
the
Bobbin
Case
Hold
the bobbin
between the thumb
and forefinger of
the right hand,
with
the thread on top
drawing
from right
to left, as shown in
Fig.
7.
FIG.
8
Then
pull
the
thread into the slot
as shown in Fig. 8,
and back under the
tension spring into
the slot at the end
of
the tension spring
as shown in Fig. 9.
FIG.
7
With
the left hand,
hold
the bobbin
case
as
shown
in Fig. 7, the
slot in the
edge
being
at the top, and place
the bobbin into the
bobbin
case.
FIG.
9