41
in Fig. 37. Draw the edge of the cloth back and
forth until the hem is formed, stopping with the end
under the needle. Lower the presser bar and com-
mence to sew, being careful to so guide the cloth as
to keep the Hemmer full.
ADJUSTABLE HEMMER—Wide Hemming
To make a hem more than fl inch wide, loosen
the thumb screw in the Hemmer and move the scale
Fin. 38
to the right as far as it will go, then swing it toward
you as shown in Fig. 38 and tighten the thumb
screw. Fold and crease down a hem of the desired
width; pass the fold under the extension at the right
of the Hemmer, and the edge into the folder as
shown in Fig. 38, and proceed to stitch the hem.
41
in
Fig. 37. Draw the
edge
of the cloth back and
forth
until
the hem is formed, stopping
with
the end
under the needle. Lower the presser bar and
com-
mence
to sew, being careful to so guide the cloth as
to keep the Hemmer
full.
ADJUSTABLE
HEMMER—Wide
Hemming
To make a hem more than yf inch wide,
loosen
the thumb screw in the Hemmer and
move
the scale
to the right as far as it
will
go, then swing it toward
you as shown in Fig. 38 and tighten the thumb
screw. Fold and crease down a hem of the desired
width;
pass the fold under the extension at the right
of the Hemmer, and the
edge
into the folder as
shown in Fig. 38, and
proceed
to stitch the hem.
,£93301
FIG.
38