44
The Adjustment and Operation of the Binder
The edge to be bound should be held well within
the center slot of the scroll (A, Fig. 43). If the
FIG.
43.
ADJUSTING
THE BINDER
material is allowed to slip away from
.
the scroll
when near the needle, the edge will not be caught
in the binding. With a little practice it is quite easy
to hold the edge in the scroll.
Various materials and conditions require different
adjustments of the Binder to bring the stitching
close to the edge. A wider adjustment of the Binder
is required when binding curves than is necessary
when binding a straight edge.
To adjust the Binder for stitching, loosen screw
(B, Fig. 43), and move scroll to the right for a nar-
rower adjustment and to the left for a wider adjust-
ment. Care should be taken to see that the screw
is well tightened after making an adjustment. To
become perfectly familiar with the adjustment of
the Binder, practice is necessary.
44
The
Adjustment and Operation of the
Binder
The
edge
to be
bound
should be held well within
the center slot of the scroll (A, Fig. 43). If the
FIG.
43.
ADJUSTING
THE
BINDER
material
is allowed to slip away from the scroll
when near the
needle,
the
edge
will
not be caught
in
the binding. With a
little
practice it is quite easy
to hold the
edge
in the scroll.
Various
materials and
conditions
require different
adjustments of the Binder to bring the stitching
close
to the
edge.
A wider adjustment of the Binder
is
required when binding curves than is necessary
when binding a straight
edge.
To adjust the Binder for stitching,
loosen
screw
(B,
Fig. 43), and
move
scroll to the right for a nar-
rower adjustment and to the left for a wider adjust-
ment. Care should be taken to see that the screw
is
well tightened after making an adjustment. To
become
perfectly familiar with the adjustment of
the Binder, practice is necessary.
To Next Page
Loading...
