Singer 15-90 - Page 45

FIG. 42. INSERT FOLDED
BINDING IN OUT-
SIDE SLOT
43
Pull the binding through under the presser foot
before starting to sew. Note that as the binding
passes through the scroll of the Binder the edges are
turned in.
FIG. 41. INSERTING BINDING IN BINDER
Binding May be Purchased Cut and Folded
for Use with the Binder
Folded bias binding
may be purchased for
use with the Binder.
The binding comes in
a variety of materials
and colors. 'Folded
bindings for use with
the Binder must meas-
ure 2" in width. The
No. 5 width in stand-
ard brands usually measures M", but it is always
well to be sure of this before purchasing.
Folded binding is inserted in the outside slot of
the Binder, as shown in Fig. 42. The Binder is
adjusted and operated in the same manner as when
using unfolded binding. One-half inch braid or
ribbon may be used in the same manner.
A binding inserted in the outside slot of the Binder
will he turned only once. It is therefore necessary
to have finished edges when using binding in this slot.
43
Pull
the binding through under the presser
foot
before
starting to sew.
Note
that as the binding
passes through the scroll of the Binder the
edges
are
turned
in.
FIG.
41.
IXSEHTIXG
BIXDIXG
IN
BINDER
Binding
May be
Purchased
Cut and Folded
for Use
with
the
Binder
Folded bias binding
may be purchased for
use
with
the Binder.
The
binding
comes
in
a
variety of materials
and
colors.
Folded
bindings for use
with
the Binder must meas-
FIG.
42.
INSERT
FOLDED
ure
in width. The
"'^''^i^^
No. 5 width in stand-
ard
brands usually measures y^", but it is always
well
to be sure of this
before
purchasing.
Folded binding is inserted in the outside slot of
the Binder, as shown in Fig. 42. The Binder is
adjusted and
operated
in the same manner as when
using
unfolded binding. One-half inch braid or
ribbon may be used in the same manner.
A
binding inserted in the outside slot of the Binder
will
be turned only
once.
It is therefore necessary
to have finished
edges
when using binding in this slot.