Singer 15-90 - Page 52

50
from the attachment and form the corner by hand,
replace it in the slot and continue stitching, as
FIG. 51. PIPING WITH THE EDGE-STITCHER
shown in Fig. 52. To space two or more parallel
rows, a guide line such as a crease, chalk mark or
basting thread should be used.
FIG. 52. APPLYING BIAS FOLDS WITH THE EDGE-STITCHER
50
from the attachment and form the corner by hand,
replace it in the slot and continue stitching, as
FIG.
51.
PIPING
WITH
THE
EDGE-STITCHER
shown in Fig. 52. To space two or more
parallel
rows,
a guide line such as a crease, chalk mark or
basting
thread should be used.
FIG.
52.
APPLYING
BIAS
FOLDS
WITH
THE
EDGE-STITCHER