Singer 236W - Page 49

78
FITTINGS
ROLLER PRESSERS
Ref.
Part
No.
No.
Des c ription
1
1528X
Roller Presser Hinge Screw Nut
2
201699C
Roller Presser Ball Cone
3
206417
Roller Presser Ball, 1/16 in.diameter
4
350104C
Roller Presser Hinge Screw
FOR MACHINE No. 236wl00
5
351883
Roller Presser, 1 in. diam. , 9/64 in. face (fine) with 1528X,
201699C, 350104C and twenty-eight 206417
6
351884
Roller Presser, 1 in.diam., 9/64 in.face (fine) (reverse
angle) with 1528X, 201699C, 350104C and twenty-eight
206417
7
351885
Roller Presser, 7/8 in. diam. , 9/64 in. face (medium) with
1528X, 201699C, 350104C and twenty-eight 206417
8
351887
Roller Presser, 1-1/4 in. diam. 9/64 in. face (fine) with
1528X, 201699C, 350104C and twenty-eight 206417
FOR MACHINES Nos. 236wl04, 236wl05, 236wlll AND 236wll2
5
351883
Roller Presser, 1 in. diam. , 9/64 in. face (fine) with 1528X,
201699C, 350104C and twenty-eight 206417
7
351885
Roller Presser, 7/8 in. diam. , 9/64 in. face (medium) with
1528X, 201699C, 350104C and twenty-eight 206417
8
351887
Roller Presser, 1-1/4 in. diam. ,9/64 in. face (fine) with
1528X, 201699C, 350104C and twenty-eight 206417
FOR MACHINE No. 236wll0
6
351884
Roller Presser, 1 in. diam. , 9/64 in. face (fine) (reverse
angle) with 1528X, 201699C, 350104C and twenty-eight
206417
SPOOL HOLDER
9
35063IX
Spool Holder Base Screw
Note: 350631X Screw is used in place of the (center) 200194F Arm
Top Cover Screw when Spool Holder is used instead of
Thread Unwinder
10
204297
Spool Holder complete, Nos. 200079X, 202068 and 204296
11 204296
Spool Holder Wire
12
202068
Spool Holder Base
13
200079X
Spool Holder Wire Hinge Screw