Singer 29K71 - Page 10

8
TO THREAD SHUTTLE FOR 29K72
Fig. 13
Place bobbin into shuttle and push back the re-
taining spring which will hold the bobbin in the
shuttle.
With
the right hand, draw the thread into the slot
in the edge of the shuttle as far as possible. See Fig. 14.
Fig. 15
Hold the bobbin between thumb and forefinger of
right hand with the thread leading from right to left.
Hold the shuttle in the left hand with its open end
up and its retaining spring moved outward. See
Fig. 13.
Fig. 14
Then draw thread to the left, up, and to the right
under the spring. See Fig. 15.
Now insert
end of thread up through the small hole
in the edge of the shuttle and through the eye in top
of the bobbin position post. See Fig. 16.
Fig. 16
From the library of: Superior Sewing Machine & Supply LLC