2 & 5 Stitch Pattern
Machines
REMOVING AND REPLACING LIGHT BULB
This machine is designed to use a 15 watt maximum
light bulb. Loosen and remove screw (1).
Insert zipper foot into top slot to open face plate (as
illustrated).
TO REMOVE LIGHT BULB
Push bulb up into socket and turn to the left to unlock
bulb pins. Pull bulb down and out of socket.
TO REPLACE LIGHT BULB
Push new bulb up into socket and turn to the right
until pins lock position. Reposition face plate Insert
screw and tighten.
Align position pin (1) and boss (2). Replace face plate.
27
To Next Page
Loading...
