Singer 320K2 User Manual

Machine produces various stitches like straight, zigzag, and decorative.

Machine converts from flat bed to tubular bed easily for different work.

Offers many useful decorative stitches controlled by levers.

Allows for decorative stitching using two needles simultaneously.

Expert and dependable Singer service available nationwide for adjustments and repairs.

Singer Sewing Centres offer a wide range of sewing supplies and services.

Machine operation is easy and straightforward for basic tasks.

Easy conversion between flat bed and tubular bed for versatile sewing.

Produces many useful decorative stitches controlled by levers.

Details about the motor's location and power requirements.

Instructions on how to connect the machine to power.

Explains how machine speed is regulated by foot or knee control.

Details stitches like buttonholes, applique, and cording using Lever A.

Describes decorative edging and applique using Lever D.

Covers stitches for hems, facings, and decorative applications using Lever E.

Explains stitches for reinforcing, patching, and elastic seams using Lever B.

Illustrates stitches for hems, facings, and decorative binding using Disc 3.

Details stitches for faced scallops and decorative stitching using Lever C.

Instructions for correctly inserting the needle into the machine's clamp.

Procedure for safely removing the bobbin from the bobbin case.

Detailed steps for winding thread onto the bobbin correctly.

Instructions for threading the bobbin case with thread properly.

Steps for correctly reinserting the threaded bobbin case into the machine.

Settings for preparing the machine for straight stitch sewing.

Settings for preparing the machine for zigzag stitch sewing.

Steps to begin the sewing process, including positioning material.

How to properly finish sewing and remove the finished work.

Details on the intermediate regulator for fine-tuning stitch width.

Procedures for disassembling the needle thread tension unit.

Steps for reassembling and reinstalling the needle thread tension mechanism.

Steps for threading the machine with two needles for twin needle sewing.

Common causes and solutions for needle breakage during sewing.

Reasons for skipped stitches and how to correct them.

Identifies causes of looped stitches and corrective actions.

Explains how to handle fabric to ensure smooth and even stitching.

Advice on caring for the machine to prevent rust during storage.

Instructions for removing and replacing the sewing machine's light bulb.

How to sew darts that are fitted precisely to garment shaping.

Techniques for sewing darts that provide flexibility and shape to garments.

Using darts in interfacings for permanent garment shaping without bulk.

Instructions for creating a cording seam using a specific sewing foot.

Creating a delicate, fray-proof hairline seam for sheer fabrics.

Method for sewing lingerie seams that resist tearing.

Techniques for creating invisible seams on specific materials like horsehair.

How to construct durable, strain-resistant seams for heavy-duty applications.

How to overcast raw edges of seams to prevent fraying.

Specific methods for finishing seams on delicate fabrics like tricot.

Method for sewing buttons with an attached thread shank for a raised effect.

How to mark the fabric accurately for buttonhole placement and length.

Correct machine settings for various buttonhole types and fabrics.

Step-by-step instructions for stitching buttonholes, including pivoting.

Specific method for creating raised or gimp buttonholes.

How to create blind stitched hems with a folded fabric edge.

Finishing blind stitched hems using seam tape for added durability.

Applying bias binding to create attractive edges on garments and fabrics.

Instructions for correctly threading the binder attachment.

How to adjust and operate the binder attachment for precise binding.

Applying binding to curved fabric edges, requiring specific handling.

Constructing durable bound seams for household articles and fabric items.

Techniques for binding net seams to prevent fraying without adding bulk.

Using decorative automatic stitch designs to enhance fabric edges with binding.

Creating scalloped edges using the Scallop Disc and adjusting stitch settings.

How to perform script stitch for marking baby items and children's wear.

Creating dimensional shadow monograms with different thread colors and twin needles.

Diagram identifying the main components of the ruffler attachment.

Instructions for lubricating the ruffler attachment for smooth operation.

How to mend tears and reinforce edges using stitching techniques.

Steps for mending worn trouser pockets, reinforcing edges.

Using zigzag stitching for repairing garments with elastic properties.

Sewing elastic waistbands to fit garments with adjustable fullness.

Applying blanket binding using multiple stitch zigzag for decorative and durable finish.