Need help?Do you have a question about the Singer 320W class and is the answer not in the manual?
General| Brand | Singer |
|---|---|
| Model | 320W class |
| Category | Sewing Machine |
| Language | English |
Instructions for releasing and engaging the anti-reversing mechanism on the sewing machine.
Procedure for synchronizing needle and drop feed movements for consistent stitch length.
Overview of common features and design aspects of the SINGER 300W/320W series.
Details on specific models, including stitch length, needle bar stroke, and clearance.
Instructions for assembling the oil pan, placing the machine, and connecting the foot lifter.
Guidance on choosing Singer needles and proper installation into the needle bar.
Information on suitable thread types and potential issues with thread quality.
How to adjust needle and looper thread tension for correct stitch formation.
Adjusting presser foot pressure for proper material feeding.
How to adjust pressure for alternating pressers on specific models.
Procedure for setting stitch length using the plunger and button controls.
How to adjust stitch length for machines equipped with a puller feed mechanism.
Adjusting the height of the presser foot when the bar is lifted.
Steps to adjust the lift of vibrating and lifting pressers for optimal sewing.
Ensuring the vibrating presser seats correctly with the needle entry.
Adjusting the feed bar to the correct height for proper feed dog operation.
Aligning the feed dog sidewise for correct needle hole clearance.
Adjusting the feed dog lengthwise to clear throat plate slots.
Adjusting the feed dog's vertical position relative to the throat plate.
Adjusting the feed lift eccentric for proper feed dog rise timing.
Aligning the needle bar for correct clearance with the feed dog holes.
Setting loop deflectors for proper clearance with the needle.
Adjusting looper sidewise position for clearance with the needle scarf.
Adjusting looper forward/backward position for clearance with loop deflector.
Aligning looper lengthwise and setting needle bar height.
Adjusting the spreader's sidewise and height position.
Setting the spreader lengthwise for correct clearance with the needle.
Adjusting the sidewise movement of the spreader for specific sewing conditions.
Modifying the needle thread take-up and guide for thread delivery.
Setting the tension releaser to correctly release needle thread tension.
Adjusting the looper thread take-up and guide for thread handling.
Guidance on adjusting the components of the Puller Feed Kit No. 32709.
Detailed steps for adjusting the puller feed mechanism on the SINGER 320W194 machine.
To Next Page
