Singer 320K2 - Adjusting Ruffler for Gathering

83
To Adjust Ruffier for Gathering, swing ad-
ju,Aing finger F' frorn needle. Raise a(ijlitlrlg
lcirl. E aud moxe it until projeclion 1) (,an be
entered in slot marked 1.111. Insert material ,,
be ruffled between two blue blades and under R
separator guide following the line marked 2 in 2
Fig. 1.19. Draw material Aightly back of needle,
lower presser bar and sc. For fits(. gathering. lurn
adi 1, In, Ra171,1
ustin,' set W C up"ard to shortel) slioke. Iset
rni[(,11ill(f,r a short stuch. V,r full glittering. torn
adjusting screw C 1,
Set the machine. for a longer stitch.
To Make a Ruffle and Sew It to 01
a Gartnent in One Oi)erlttiort. insert
material to be ruffled between two blue
blades and under separator guide. Place
material to which ruffle is to be attached
under sc arator blade and under separator
guide. Irrocced the same as for plain
gathering,
ig. 160. Maky Ruffir and It in On,