Singer 3368 - Specialty Hemming; Sewing a Blind Hem; Blind Hemming Stretch and Firm Fabrics

For hems, curtains, trousers, skirts, etc.
Blind hem for stretch fabrics. Position
Set the machine as illustrated.
Fold the fabric as illustrated with the wrong side uppermost. (1)
Place the fabric under the foot. Turn the handwheel forwards by
hand until the needle swings fully to the left. It should just pierce
the fold of the fabric. If it does not, adjust the stitch width
accordingly. (2) Adjust the guide (3) by turning the knob (4) so
that the guide just rests against the fold. Sew slowly, by pressing
the foot control lightly guiding the fabric along the edge of the
guide.
Stitch width Stitch length
Note:
It takes practice to sew blind hems. Always make a sewing test
first.
a. b. c. Presser foot
d. Stitch pattern
a
b
1~2
Blind hem
21
c
d
1
2
3
4
3~5
E FD
on selection dial.
"D"
* The blind hem foot is an optional accessories.
Blind hem/lingerie for firm fabrics.Position "E" or "F" on
selection dial.