3-step zig-zag
27
Sewing on lace and elastic, darning, mending, reinforcing edges.
Set the machine as illustrated. Pattern selector on "C".
Place patch in position. The stitch length can be shortened to
produce very close stitches. (1)
When mending tears, it is advisable to use a piece of backing
fabric to reinforce. The stitch density can be varied by adjusting the
stitch length. First sew over the center and then overlap on both
sides. Depending on the type of fabric and damage, sew between
3 and 5 rows. (2)
1
2
C
1~2
3~5
To Next Page
Loading...
