Singer 3368 - Basic Darning Procedure; Darning Damaged Fabric

33
- Turn stitch length dial to the desired length.
- Turn stitch selector to straight stitch, center needle position.
- Position the fabric to be darned under the presser foot together
with the under laying fabric to be used.
- Lower the presser foot and alternately sew forward or reverse
using the lever.
- Repeat this motion until the area to be darned is filled with rows
of stitching.
Darning
A
1~4
3~52.5
2~4
For reverse sewing instructions,see page 16.