Singer 3368 - Powering the Sewing Machine; Connecting to Power Source; Operational Safety Precautions

Connecting machine to power source
6
3
Caution:
Attention:
Always make sure that the machine is unplugged from power source
and the main switch is on "O". when the machine is not in use and
before inserting or removing parts.
Consult a qualified electrician if in doubt as to connect machine to
power source. Unplug power cord when machine is not in use.
- This machine is equipped with a polarized plug which must be used
with an appropriate electrical outlet.
- Connect the machine to a power source as illustrated (1/2).
- The power switch is located above the terminal box. Your machine
will not operate unless this switch is on " I ". (1)
- Sewing light turns on automatically when the main switch is on " I ".
the machine is regulated by the amount of pressure exerted on the
foot control.
1
2
A
B
- To start the machine,press the foot control (3).The speed of