Need help?Do you have a question about the Singer 5417C and is the answer not in the manual?
General| Brand | Singer |
|---|---|
| Model | 5417C |
| Category | Sewing Machine |
| Language | English |
This selector positions the needle in the center, left and right positions.
This selector adjusts the width of the zigzag stitching.
This selector adjusts space between stitches. The dot (mark in relief) is the indication.
It selects the stitch type. In the S5430C model it has 8 positions, from A to H.
This selector adjusts the movement of the zigzag stitching with forward and reverse movement.
The correct tension setting will produce smooth and even stitches with the needle and bobbin threads.
Too much tension will produce a tight stitch, which will cause the cloth to pucker.
Satin stitching is a type of zigzag tight stitch, which is ideal for form embroidery and pattern application.
Use the stitch balance selector to adjust the opening of the stitch. Move selector to the left to bring stitches closer.
Checks for common issues when the needle fails to move.
Troubleshooting steps when the needle moves but no stitch is produced.
Common reasons for needle breakage during sewing operations.
Steps to resolve problems encountered during bobbin winding.
Diagnosis and solutions for upper thread breakage.
Troubleshooting common issues causing lower thread breakage.
Causes and remedies for skipped stitches during sewing.
Checks to ensure correct fabric feeding under the presser foot.
To Next Page
