Need help?Do you have a question about the Singer 5400 Series and is the answer not in the manual?
General| Stitch Applications | 60 |
|---|---|
| Built-in Stitches | 60 |
| Automatic Needle Threader | Yes |
| Free Arm | Yes |
| LED Lighting | Yes |
| Type | Electronic |
| Bobbin Type | Top Drop-In |
| Sewing Speed | 750 stitches/minute |
Procedure for removing and replacing the head end assembly, with important replacement notes.
Steps for removing and replacing the arm shaft and horizontal bevel gear, including timing.
Details on removing and replacing the cam controlled feed mechanism for model 5430.
Instructions for removing and replacing the motor and motor belt, including attention notes.
Procedure for removing and replacing the hook assembly, including timing and adjustments.
Details on removing and replacing the vertical shaft bevel gear and setting its mesh.
Outlines the recommended sequence for performing machine adjustments.
Procedure for checking and adjusting the end play of the vertical shaft.
Instructions for checking and adjusting bevel gear mesh and arm shaft end play.
Procedure for checking and adjusting the needle bar height for proper hook point seizure.
Instructions for checking and adjusting the needle bar pendulum timing for correct zig-zag.
Steps for centralizing the needle position during zig-zag sewing operations.
Procedure to ensure left, center, and right needle penetrations align correctly.
Ensuring proper distance between needle and hook to prevent skipped stitches or damage.
Guidelines for lubricating the sewing machine using specified oils and greases.
To Next Page
