Singer 8007; 8019; 8002 - IMPORTANT SAFETY INSTRUCTIONS; DANGER-To reduce the risk of electric shock; WARNING- To reduce the risk of burns, fire, electric shock or injury

IMPORTANT SAFETY
INSTRUCTIONS
When
using this machine.
basic safety precautions
should always be
followed including the
following;
Read all instructions
before using
this machine.
DANGER To reduce the risk of electric shock:
* The niachins
should never be left unattended
when plugged in. Always unplug
the
machine from the electric
outlet immediately after using
and before cleaning.
* Always unplug before relamping.
Replace bulb with the same type rated
1 watts. Be
sure
to replace the face plate which
covers the light bulb before operating
the
machine,
WARNING To reduce the risk of burns. .fire. .eiectric shock or injury to persons:
* Be
sure that the electrical voltage of
the socket outlet (wall receptacle )is
the same
as the rated voltage of the motor.
* Use
this machine only
for its intended use
as described in
this Operator's Guide.
Use
only attachments
recommended by the manufacturer as contained in the Operator's
Guide.
* To disconnect, turn all
controls to the off 00" )position,
then remove plug from
outlet.
*
Disconnect the
power line plug
from the socket
outlet or switch
the machine
off when
making any adjustments
in the needle area,. such
as threading needle , changing
needle changing throat
plate or changing presser
toot etc.
* Always
unplug the machine from
the electrical outlet when
removing covers.
lubricanting . or
when making any other
user servicing
adjustments mentioned
in the
Operator's Guide.
* Do not
attempt to adjust
the motor belt.Contact
your nearest Service
Center should
any adjustment be required.
* Do not unplug by pulling
on cord. To unplug .grasp
the plug .not the cord.
Handle the
foot controller with care and avoid
dropping it on the floor, Be sure not
to
place anything
on top of it.
* Always use the proper throat
plate. The wrong plate can cause the
needle to break.
* Do not
use bent needles,
When sewing.
keep fingers
away from all
moving parts. Special
care is required
around the sewing machine needle,
* Do
not pull or push fabric
while stitching. It
may deflect the needle
causing it to
break.
Before removing the
bobbin case *remove plug
from the socket outlet,
* For double insulated
machines ,when servicing use only
identical replacement parts.
See instructions
for Servicing of Double
Insulated Appliances.