Need help?Do you have a question about the Singer 95-80 and is the answer not in the manual?
General| Brand | Singer |
|---|---|
| Model | 95-80 |
| Category | Sewing Machine |
| Language | English |
Provides guidance on operating and setting up Singer 95-80 and 95-100 sewing machines.
Lists specific Singer oils and lubricants for sewing machines and motors.
Details the features of Singer 95-80 and 95-100 sewing machines.
Specifies recommended speeds for new machines and maximum operating speeds.
Identifies specific points for oiling on the front of the sewing machine.
Identifies specific points for oiling on the back of the sewing machine.
Instructions for lubricating the upper gear case using grease.
Instructions for lubricating the lower gear case using grease.
Details oiling locations within the base of the sewing machine.
Specifies the oiling point for the sewing hook race.
Information on needle classes, sizes, and how to order them.
Guidance on selecting thread and determining its twist for sewing.
A guide correlating needle sizes and thread types to classes of work.
Essential operating tips to ensure the machine functions correctly.
Step-by-step instructions on how to remove the bobbin from the machine.
Instructions on how to wind thread onto a bobbin using the machine's winder.
Detailed guide on how to thread the bobbin case correctly.
Instructions on how to correctly place the threaded bobbin case back into the machine.
Steps for correctly inserting and tightening the sewing needle.
Step-by-step guide for threading the upper thread through the machine.
Instructions on drawing up the bobbin thread to prepare for stitching.
Guidance on starting the sewing process.
Instructions for safely removing finished work from the machine.
Visual examples of perfect, tight needle, and loose needle thread tensions.
Instructions on how to adjust needle and bobbin thread tensions.
How to adjust the stitch length using the thumb screw.
How to adjust the presser foot pressure on the fabric.
Detailed steps to set the needle bar at the correct height for timing.
Instructions on how to correctly time the sewing hook with the needle.
How to adjust the hook's position relative to the needle for correct timing.
Steps to remove and install the sewing hook.
Instructions for removing and installing the sewing hook shaft.
How to adjust the thread take-up spring for proper tension.
Instructions on setting the timing for the feed eccentric.
To Next Page
