What to do if my Singer Sewing Machine will not run?
If your Singer Sewing Machine won't run, ensure the cord is fully plugged into the electrical outlet and the power switch is turned on. Also, check that the bobbin winder spindle is pushed to the left, the presser foot is lowered, the buttonhole lever is completely lowered, and the buttonhole foot is attached.
Why does the upper thread keep breaking on my Singer 9960 Sewing Machine?
If the upper thread breaks on your Singer Sewing Machine, re-thread the machine. Also, remove any thread entwined around the bobbin, re-insert the needle if it's incorrectly placed, readjust the thread tension if it's too tight, and choose the correct thread size and quality.
What to do if my Singer Sewing Machine skips stitches?
If your Singer Sewing Machine skips stitches, re-insert the needle, or insert a new needle if the current one is bent or blunt. If you are sewing stretch fabric, ensure you are using the correct size needle, specifically a stretch needle.
What to do if my Singer Sewing Machine does not feed properly?
If your Singer Sewing Machine does not feed properly, raise the feed dogs. Adjust the stitch length to be suitable for the fabric and clean any lint and dust accumulated around the feed dog.
Why is the needle breaking on my Singer Sewing Machine?
If the needle breaks on your Singer Sewing Machine, avoid pulling the fabric while sewing. Ensure the needle isn't hitting the presser foot by selecting the correct foot and pattern. Re-insert the needle if it's incorrectly placed, and choose the correct size needle and thread for the fabric you're using.
Why does the lower thread break on my Singer 9960?
If the lower thread breaks on your Singer Sewing Machine, re-thread the bobbin. If the bobbin is wound unevenly or too full, rewind it. Also, clean any dirt from the bobbin holder.
Why is my Singer 9960 making loose stitches or loops?
If your Singer Sewing Machine makes loose stitches or loops, re-thread both the machine and the bobbin. Also, readjust the thread tension.
What to do if the threader on my Singer 9960 Sewing Machine does not thread the needle eye?
If the threader on your Singer Sewing Machine does not thread the needle eye, raise the needle. If this doesn't work, re-insert the needle or insert a new one if it is bent.
How to fix a Singer Sewing Machine that runs with difficulty?
To address difficulty running your Singer Sewing Machine, remove the needle plate and bobbin holder, and then clean the hook race and feed dog to remove any accumulated dirt or lint.
Why is fabric puckering when I use my Singer 9960 Sewing Machine?
If the fabric puckers when using your Singer Sewing Machine, re-thread both the machine and the bobbin. Replace a blunt needle with a new one, and readjust the thread tension, as it might be too tight.
General| Stitch Patterns | 600 |
|---|---|
| Buttonhole Styles | 13 |
| Maximum Sewing Speed | 850 stitches per minute |
| Built-in Needle Threader | Yes |
| Automatic Thread Cutter | Yes |
| Extension Table | Yes |
| LCD Screen | Yes |
| Type | Computerized |
| Bobbin System | Top Drop-In |
| Adjustable Stitch Length | Yes |
| Adjustable Stitch Width | Yes |
| Mirror Imaging | Yes |
| Stitch Elongation | Yes |
| Stitch Width | 7mm |
| Stitch Length | 5mm |
| Voltage | 110V |
| Warranty | 25-year limited |
| Included Accessories | Needles, Bobbins, Seam Ripper, Lint Brush, Screwdrivers, Auxiliary Spool Pin |
Warnings about unplugging the machine after use and before cleaning.
Precautions for safe operation, including child safety and proper usage.
Instructions to prevent electrical hazards, emphasizing unplugging the machine.
Guidelines to avoid burns, fire, electrical shock, and injuries during operation.
Step-by-step guide on how to correctly attach and remove presser feet.
Critical safety notice regarding machine power connection and unattended operation.
Safety precautions for connecting power, including unplugging by plug.
Important safety advice for handling and using the foot controller.
Description of the LCD screen and how to adjust its contrast for better visibility.
Detailed instructions on how to wind a bobbin with thread.
Initial steps before threading the upper thread, including needle positioning.
Instructions for correctly placing the thread spool on the machine.
Step-by-step guide for threading the upper thread through the machine.
Detailed process for threading the needle eye, including using the needle threader.
How to bring the bobbin thread up to the needle area for sewing.
Guide for starting and finishing a seam, including thread cutting.
Explanation of the machine's default thread tension and its function.
How to adjust upper thread tension using function buttons F5 and F4.
Notes on tension for specific stitches and troubleshooting common tension issues.
Overview of buttonhole types and instructions for using the buttonhole foot.
Steps for marking buttonhole placement and sewing them accurately.
Steps for inserting twin needles and threading with two threads.
How to perform sewing operations using twin needles for decorative effects.
Instructions for cleaning the bobbin holder to ensure smooth operation.
Detailed steps for cleaning the hook race and feed dogs for optimal performance.
Steps to clean the bobbin case and ensure proper thread path.
Procedure for cleaning essential moving parts like the hook race and feed dogs.
To Next Page
