Singer 95-80 - Sewing Preparation and Execution; Drawing Up the Bobbin Thread; Commencing Sewing; Removing the Work

To Prepare for Sewing
Vlth the left hand hold the end of the needle thread, leaving
It slack from the hand to the needle, turn the balance v^eel over
Fig.16. Drawing Up the Bobbin Threac
toward you until the needle moves down and up again to Its highest
point, thus catching the bobbin thread; draw up the needle thread
and the bobbin thread will come up with It through the hole In the
throat plate (see Fig.16). Lay both threads back under the pres-
ser foot.
To Commence Sewing
Place the material beneath the presser foot, lower the presser
foot and commence to sew, turning the balance wheel over toward
you.
To Remove the Work
Let the thread take-up lever rest at its highest point, raise
the presser foot, draw the work back and cut the threads close to
the goods.
From the library of: Superior Sewing Machine & Supply LLC