Singer 9858 User Manual

358426002 MAR/05
Service Manual
Household Sewing
Machine
THE SINGER COMPANY
2005 SINGER DO BRASIL
ALL RIGHTS RESERVED
Registered Trademark “THE SINGER COMPANY LTD.” Registered Trademark “THE SINGER COMPANY LTD.”
Impresso no BrasilImpresso no Brasil
9876/9868/9860/
9858/
9855/9852/9850
9876/9868/9860/
9858/
9855/9852/9850

Singer 9858 Specifications

General

Type	Computerized
Maximum Stitch Width	7mm
Maximum Stitch Length	5mm
Needle Threader	Yes
LCD Screen	Yes
Built-in Memory	Yes
Stitch Memory	Yes
Bobbin System	Top Drop-in
Speed Control	Yes
Extension Table	Yes
Needle Positions	13
Drop Feed	Yes
Free Arm	Yes
Accessories Included	Needles, Bobbins, Seam Ripper, Lint Brush, Spool Caps, Auxiliary Spool Pin, Screwdriver, Thread Spool Net, Seam Guide
Buttonhole Styles	13 One-Step

Summary

Section 1 Parts Removal and Replacement

Face Plate Cover

Procedure for removing and replacing the sewing machine's face plate cover.

Light Bulb Replacement

Instructions for replacing the light bulb in the sewing machine.

Arm Top Cover

Procedure for removing and replacing the arm top cover of the sewing machine.

Right Side Cover

Instructions for removing and replacing the right side cover of the sewing machine.

Bed Bottom Cover

Procedure for removing and replacing the bed bottom cover of the sewing machine.

Needle Bar

Procedure for removing and replacing the needle bar of the sewing machine.

Head End Assembly

Instructions for removing and replacing the head end assembly of the sewing machine.

Needle Threader Assembly

Procedure for removing and replacing the needle threader assembly.

Take-up Lever Assembly and Needle Bar Connecting Link

Instructions for removing and replacing the take-up lever and needle bar connecting link.

Hand Wheel and Shaft Driver Assembly

Procedure for removing and replacing the hand wheel and shaft driver assembly.

Cam Stack

Instructions for removing and replacing the cam stack assembly.

Arm Shaft and Horizontal Bevel Gear

Procedure for removing and replacing the arm shaft and horizontal bevel gear.

Tension Assembly

Instructions for removing and replacing the sewing machine's tension assembly.

Needle Bar Driving Arm and Needle Bar Driving Arm Tension Spring

Procedure for removing and replacing the needle bar driving arm and its tension spring.

Cam Controlled Feed Mechanism

Instructions for removing and replacing the cam controlled feed mechanism.

Motor and Motor Belt

Procedure for removing and replacing the motor and motor belt.

Hook

Instructions for removing and replacing the sewing machine hook assembly.

Feed Lifting Lever Assembly (for models with drop feed)

Procedure for removing and replacing the feed lifting lever assembly on models with drop feed.

Feed Lifting Lever Assembly (for machines without drop feed)

Procedure for removing and replacing the feed lifting lever assembly on models without drop feed.

Feed Rock Shaft Assembly

Instructions for removing and replacing the feed rock shaft assembly.

Feed Forked Connection

Procedure for removing and replacing the feed forked connection.