Singer 95-80 - Stitch and Pressure Settings; Regulating Stitch Length; Regulating Material Pressure

14
To Regulate the Length of Stitch
The length of stitch Is regulated by the thumb screw (B,Flg.
S) In the slot on the front of the upright part of the arm. To
lengthen the stitch, loosen this thumb screw and move It down
ward. To shorten the stitch, loosen this thumb screw and move
It upward. When the desired length of stitch has been obtained,
tighten the thumb screw (B).
To Regulate the Pressure on the Material
The pressure on the material is regulated by the thumb screw
(D,Flg.2). To Increase the pressure, turn this thumb screw over
to the right. To decrease the pressure, turn this thumb screw
over to the left.
Genuine Singer Needles should be used
in Singer Machines.
These Needles and their Containers
are marked with the
Company's Trade Mark "SIMANCO." I
Needles in Containers marked
**For Singer Machines'*
are not Singer made needles.
From the library of: Superior Sewing Machine & Supply LLC