Need help?Do you have a question about the Singer 832U and is the answer not in the manual?
General| Buttonhole Styles | 1-Step |
|---|---|
| Needle Threader | Yes |
| Built-in Stitches | 32 |
| Stitch Type | Decorative |
| Presser Feet | Buttonhole Foot, Button Sewing Foot |
Steps to mount and secure the sewing machine head onto the table.
Instructions for installing and adjusting the motor pulley and drive belt.
Detailed explanation of the needle bar's operational mechanism and its components.
Description of the mechanism for the under looper and its associated parts.
Explanation of the over looper mechanism, including its movement and components.
Details on the mechanism of the double chain stitch looper operation.
Explanation of the upper and lower knives mechanism and their function.
How the feed mechanism and stitch length regulator operate.
Explanation of the differential feed mechanism and its adjustment.
Details on the presser foot mechanism and its lifting operation.
Steps to disassemble the various covers of the sewing machine.
Procedure for disassembling the feed and presser foot mechanisms.
Procedure for disassembling the sewing machine's knives.
Procedure for disassembling the under looper mechanism.
Procedure for disassembling the over looper mechanism.
Procedure for disassembling the double chain stitch looper.
Procedures for assembling and adjusting the needle bar mechanism.
Procedures for assembling and adjusting the under looper mechanism.
Procedures for assembling and adjusting the over looper mechanism.
Procedures for assembling and adjusting the double chain stitch looper.
Procedures for assembling and adjusting the knives mechanism.
Procedures for assembling and adjusting feed dog and presser foot.
Procedures for assembling and adjusting looper thread take-up and guides.
Procedures for assembling double chain stitch looper thread take-up and guides.
Procedures for assembling and adjusting the needle cooler mechanism.
Procedures for assembling and adjusting the front cover mechanism.
Instructions on adjusting the eccentric wheel and main feed shaft for differential ratio.
Method for increasing stitch length by adjusting the eccentric wheel movement.
Instructions for installing and adjusting the blind hemming ruler.
Instructions for installing and adjusting the serging ruler assembly.
Instructions for installing and adjusting the ruffler assembly for ruffling.
Instructions for installing and adjusting the tape guide for taping operations.
Instructions for installing and adjusting wrapper, tape guide, and winder for binding.
Guidelines for thread tension and stitch settings for single-needle, two-thread sewing.
Guidelines for thread tension and stitch settings for single-needle, three-thread sewing.
Guidelines for thread tension and stitch settings for double-needle, four-thread sewing.
Guidelines for thread tension and stitch settings for double-needle, five-thread safety stitches.
Checks and adjustments for thread breakage on the overlock stitch needle.
Checks and adjustments for thread breakage on the double chain stitch needle.
Checks and adjustments for thread breakage on the looper thread.
Checks and adjustments for skip stitching with overlock stitch.
Checks and adjustments for skip stitching with double chain stitch.
Checks and adjustments for needle breakage.
Checks and adjustments for improper thread tension issues.
Checks and adjustments for incorrect chaining-off with overlock stitch.
Checks and adjustments for incorrect chaining-off with double chain stitch.
Checks and adjustments to prevent excessive wrinkles in fabric.
Checks and adjustments to prevent cloth slippage during sewing.
To Next Page
