Need help?Do you have a question about the Singer 831U and is the answer not in the manual?
General| Brand | Singer |
|---|---|
| Model | 831U |
| Category | Sewing Machine |
| Language | English |
Procedures for mounting the sewing machine head onto the table base.
Guidance on setting and operating the machine at optimal sewing speeds.
Instructions for selecting and installing motor pulleys and V-belts.
Steps for fitting the drive belt and its protective cover.
How to install the thread unwinder accessory for efficient operation.
Guide for fitting the eye guard onto the face plate for safety.
Specifies the recommended type of oil for machine lubrication.
Details on oiling procedures, levels, and scheduled oil changes.
Instructions for using the needle cooler with specific fabrics and threads.
Guidance on selecting appropriate needles and threads for various fabrics.
Step-by-step instructions for correctly inserting and securing the needle.
Detailed process for threading the machine's various thread paths.
How to adjust needle and looper thread tension for optimal stitch quality.
Basic steps for operating the sewing machine and starting sewing.
Procedures for adjusting the stitch width (bight) and trimming.
Instructions for setting and adjusting the stitch length.
How to adjust differential feed for stretch, normal, or gather effects.
Adjusting the left hand looper and needle bar positions for proper stitch formation.
Procedures for adjusting the right hand looper to meet the left looper.
How to adjust the cutting knives for proper trimming performance.
Steps for adjusting the height of the feed dogs.
Adjusting the ratio of differential feed for various fabric types.
Installing and adjusting the blind hemming guide attachment.
Instructions for installing and using the serging attachment.
How to install and adjust for turn-down hemming operations.
Guide for installing and using the tape guide attachment.
To Next Page
