Need help?Do you have a question about the Singer Dry Up SDHM-20DI and is the answer not in the manual?
General| Brand | Singer |
|---|---|
| Model | Dry Up SDHM-20DI |
| Category | Dehumidifier |
| Language | English |
Explains how to choose High or Low dehumidifying modes without setting exact humidity.
Details how to set the desired humidity level using Auto dehumidifying mode.
Explains how to turn the unit on or off using the Power button.
Details how to lock and unlock all control panel buttons for safety.
Default mode, adjusts fan speed based on room humidity relative to set point.
Unit operates with high fan speed regardless of room humidity.
Unit operates with low fan speed regardless of room humidity.
Only the fan operates; fan speed can be adjusted.
Used to dry the unit's interior for long-term storage, preventing mildew.
Explains how to use the ionizer for air purification and the swing function for air outlet adjustment.
Explains how to set a timed shutdown for the unit from 1 to 24 hours.
Explains how to set a timed startup for the unit.
Describes the functions of the Humidity button for setting room humidity and fan speed.
Details the symbols and information shown on the unit's LED display.
Guides on plugging in, turning on, and initial manual adjustments for operation.
Instructions on how to empty the water tank when it is full.
Information on connecting a drainage pipe for continuous water removal.
Warning on turning off the unit before cleaning and avoiding hot water or solvents.
Steps for cleaning the water tank, unit surface, and air filter.
Summarizes common issues like hot air, unit not operating, or dehumidifying function failure.
Addresses problems such as no air coming out or the unit being noisy during operation.
To Next Page
