Singer ESP36T1 - Features & Accessories Descriptions

ENGLISH – 5
FEATURES & ACCESSORIES DESCRIPTIONS
1. Handle – raises and lowers the Pressing Plate. Also used to carry the unit.
2. Locking Knob – locks the Pressing Plate and Ironing Board together.
3. Pressing Plate – large temperature-controlled surface that heats and presses fabric.
4. Ironing Board – padded surface onto which fabric is placed for pressing.
5. Water Tank – holds the water needed to produce steam.
6. Steam Burst Buttons – located on either side of the Handle and produces a burst of steam
when pressed.
7. On/Off Button – activates and deactivates the unit.
8. Temperature Control – used to select a desired temperature by cycling through the list
of choices above the buttons. Adjust the Temperature Control until the Indicator Light
beneath your preferred material becomes illuminated.
9. Steam Selector Button – selects Auto Steam “ ” or Man Steam “ ”.
10. Power Indicator Light – illuminates when On/Off Switch is in “On” (|) position.
11. Steam Ready Indicator Light – illuminates when unit is ready to produce steam for use.
12. Pressing Indicator Light – illuminates while unit is heating to selected temperature. When
light goes off, Steam Press is ready for use.
13. Temperature Digits – indicates Pressing Plate surface temperature.
14. Power Cord Indicator Light – illuminates when power is “On”.
15. Storage Compartment – provides a convenient place to store needlecraft items such as
needles, thread and scissors.
16. Spray Bottle – used to moisten fabric before pressing stubborn wrinkles and heavier
fabrics.
17. Pressing Cushion – fabric covered pad used for pressing gathered or contoured areas
such as sleeves, darts, collars or yokes.
18. Measuring Cup – used to assist in easily lling the Water Tank (best with distilled water).