Singer SP-550 - User Manual

Questions and Answers

R
robertdonaldsonAug 11, 2025
How to fix Singer Steam Cleaner when it doesn't heat up and the power light is off?
- B
  brownshirleyAug 11, 2025
  If your Singer Steam Cleaner fails to heat up and steam, but the power indicator light does not illuminate, first ensure the unit is properly plugged into an electrical outlet. If it is plugged in, check your household circuit breaker or ground fault interrupter. Reset it if it has tripped, or replace the fuse. If you need further assistance with electrical issues, contact a licensed electrician.
Z
Zachary DickersonAug 17, 2025
Why is the steam burst weak on my Singer Steam Cleaner?
- C
  catherinehughesAug 17, 2025
  If the steam burst output on your Singer Steam Cleaner is weak or intermittent, the pressing plate may need to be cleaned.
R
Robert StewartAug 23, 2025
What to do if my Singer Power Tool doesn't heat up and the power light is off?
- T
  tina41Aug 23, 2025
  If your Singer Power Tool fails to heat up and steam, and the Power Indicator Light does not illuminate, first, ensure the unit is properly plugged into an electrical outlet. If it is, check your household Circuit Breaker/Ground Fault Interrupter; reset it or replace the fuse if necessary. If problems persist, it's recommended to contact a licensed electrician for assistance.
M
Michael SharpAug 29, 2025
Why is my Singer Power Tool not heating up, even though the power light is on?
- A
  Anthony WardAug 29, 2025
  If the Singer Power Tool fails to heat up and steam, but the Power Indicator Light does illuminate, it could be due to several reasons. First, the Auto Shut-Off might have engaged, so refer to the Auto Shut-Off section of this manual for proper procedure. Secondly, the Water Tank might be empty; refill it using the procedures found in this manual. Lastly, the unit might be damaged or malfunctioning; in this case, immediately cease usage and contact our Consumer Support Department.
H
Henry HamptonSep 4, 2025
How to fix weak steam burst on Singer Power Tool?
- I
  Ian BlevinsSep 4, 2025
  If the Steam Burst output of your Singer Power Tool is weak or intermittent, the Pressing Plate may need to be cleaned. Refer to the Cleaning section of this manual for proper procedure.

Singer SP-550 Specifications

General

Model	SP-550
Category	Steam Cleaner
Water Tank Capacity	1.5 liters
Heat-up Time	8 minutes
Operating Time	45 minutes
Cord Length	5 meters
Power	1500W
Accessories	brush, measuring cup