Singer Inspiration 4210 User Manual

Singer Inspiration 21
Setting
Timing of Hook and Needle
Check
NOTE! Before checking hook timing, check the following rst.
- Needle bar height
- Needle to hook relationship.
- Needle bar safety bight stop.
- Hook belt drive tension.
1. Place a size 18/110 needle in the machine
2. Turn the handwheel to the front of the machine, to
so the needle bar comes to its lowest position, continue
turning to raise presser bar until the central mark (a) to is
ush with bottom face of bushing (b).
3. the point of the hook (c) should now be in the center of
the needle blade.
Adjustment
1. Turn the handwheel to the front of the machine, to so the
needle bar comes to its lowest position, continue turning to
raise presser bar until the central mark (a) to is ush with
bottom face of bushing (b).
2. the point of the hook (c) should now be in the center of
the needle blade.
3. Loose the two screws (d) of the pulley (e). Turn the pul-
ley until the hook point is behind and in the center of the
needle.
4. Push the pulley up and tighten the two screws. Recheck
and readjust if necessary.
5. After, check the needle bar height.

Singer Inspiration 4210 Specifications

General

Free arm	Yes
Control type	Rotary
Product color	White
Buttonhole type	4 Step
Number of programs	21
Sewing machine functions	Sewing
Number of stitch patterns	10
AC input voltage	220 - 240 V

Weight and Dimensions

Width	430 mm
Height	310 mm
Weight	8000 g