To secure the beginning and the end of a seam, press down the
reverse sewing lever (A). Sew a few reverse stitches. Release
the lever and the machine will sew forwards again. (1)
Turn the handwheel counterclockwise to bring the thread take
up lever to its highest position, raise the presser foot and
remove work behind (2)the needle and presser foot.
Pull the threads behind the presser foot. Guide the threads to
the side of the face plate and into thread cutter (B). Pull threads
down to cut. (3)
Removing the work
Cutting the thread
32
GB
Reverse sewing
A
B
1
3
2
To Next Page
Loading...
